NANO-TECH 7

CARBON CLEANING MACHINE

NANO-TECH 7 brings the latest in innovative a high-performance oxidizing gas from Europe; which has been proven to be a safe and eco-friendly process for your engine.

A CARBON CLEANING MACHINE VORTEX12 is capable of removing carbon build up, dirt, varnish, and gum from your engine; without leaving behind any toxic residue or the need to dismantle engine components.

A CARBON CLEANING MACHINE VORTEX 12 can assist in returning your vehicle’s engine back to the manufacturer’s original design parameters.

Restore Engine Performance
Recover Fuel Efficiency
Reduce Emissions
Restore torque
Fewer vibrations- Quieter engine
Removes carbon, gum, varnish and dirt from inside your engine without expensive dismantling of components

Eco-friendly/Non-Toxic/ No Solvents or Acids.

If you are looking to remap your ECU or install a turbo etc. book in a CARBON CLEANING MACHINE VORTEX12 first to obtain optimum performance.

A CARBON CLEANING MACHINE VORTEX12 can also be a safe and legal option to blanking EGR and DPF removal

GREEN CAR ECO7+

Restore your engine to the performance you had when it was new with GREEN CAR ECO 7+ today

As a result of the GREEN CAR ECO 7+ you can expect

Increases Horsepower by 10% or greater
Boosts torque 10% or more
Creates fuel efficiency savings of 35%
Extends the life-span of engine components
Reduces engine noises (knocks and pings)
Turns off check engine light ensuring the vehicle meets emissions standards
Eliminates chunking of removed chemical build up that can harm the engine

The green car ECO7+ keeps your car fuel-efficient, environmentally friendly and has no carbon deposits.

Double Turbine Turbo Charger

Universal fit for all vehicles with intake/supercharger size 65mm ~ 74mm

Dual saver fan spins with the engine speed while generating a maximum force

that creates powerful airflow into the combustion chamber at high speed
The propeller sucks the airflow into the combustion chamber at a higher speed resulting atomized

burning which increase horse power and saves gasoline
Rubber holder can increase the diameter of fan for fitting in the tube

Fully burning
Increase horse power
Saves gasoline

Maximum Speed Movement: 55,000R/Min
Size (Dia. x L): Approx. 2.5 x 2.95 inch/6.4 x 7.5 cm
Body Diameter with Rubber Holders Wrapped on: Approx. 2.8 inch/7 cm
Material: Aluminum alloy and rubber

Installation:
Remove air inlet hose located between air purifier
Put the intake fan into the air inlet hose
Use rubber holder attached to fit into the tube with a larger diameter

Pls notice

Silver Fan with 3pcs Black Rubber

RED Fan with 3pcs Black Rubber

Blue Fan with 3pcs Blue Rubber

Black Fan with 3pcs Black Rubber

Car Fuel Save ECO OBD2 Interface

ECO OBD2 is a Plug&Drive Ready device to function the increasing the performance of engine.

ECO OBD2 is easy to install. Just plug it into the OBD2 connector of cars. ECO OBD2 fits all car from the year of 1996.

It works based OBD2 protocols as remaping the Car’s computer ECU. After driving 200 km road total, ECO OBD2 adjusts itself to the car,

according to the drivers’ habits and always keeps remaping the ECU to increase the performance of engine.

Up to 35% more power
Up to 25 % more torque

According to your driving habits, ECO OBD2 makes new map in the car’s computer ECU to increase the performance of your car.

As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle’s power and torque increasing.

ECO OBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

When it plugged into OBD2 connector, ECO OBD2 receives the information from the car computer ECU. With the received data from ECU,

ECO OBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.

ECO OBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.

ECO OBD2 finds out the hidden power of your car. ECO OBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.

ECO OBD2 does not change any of the settings permanently. To turn back to the car’s original settings, just unplug ECO OBD2 from OBD2 connector.

OBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

When it plugged into OBD2 connector, ECO OBD2 receives the information from the car computer ECU. With the received data from ECU,

ECO OBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.

ECO OBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.

ECO OBD2 finds out the hidden power of your car. ECO OBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.

ECO OBD2 does not change any of the settings permanently. To turn back to the car’s original settings, just unplug ECO OBD2 from OBD2 connector.

Research

NANO-TECH 7 brings the latest in innovative a high performent oxidizing gas from Europe; which has been proven to be a safe and eco-friendly process for your engine.

Discovery

The green car ECO7+ keeps your car fuel-efficient, environmentally friendly and has no carbon deposits.

Analysis

A CARBON CLEANING MACHINE VORTEX 12 can assist in returning your vehicle’s engine back to the manufacturers original design parameters.

Testing

Mobile Service Belgium Owned and Independently Operated

25%

more torque

38%

fuel efficiency

35%

more power

10%

Boosts torque

Our products

It’s time to take action to protect our planet and our wallets

“To raise new questions, new possibilities, to regard old problems from a new angle, requires creative imagination and marks real advance in science.”

NANO-TECH 7, CHIEF SCIENTIST

NANO-TECH 7 USES technology to solve problems

NANO-TECH 7 brings the latest in innovative a high performent oxidizing gas from Europe; which has been proven to be a safe and eco-friendly process for your engine.

A CARBON CLEANING MACHINE VORTEX12 is capable of removing carbon build up, dirt, varnish and gum from your engine; without leaving behind any toxic residue or the need to dismantle engine components.